If you’ve gone to the trouble of getting a sharp suit or tux for prom, you don’t want a crumpled shirt to let the side down. And while your mum or dad might usually do the ironing, you’re getting ready to be a man of the world now so you should really be able to it yourself.

So this is it: here’s how to iron your prom shirt like a pro.

Start easy: plug in the iron. You’re going to need to select a setting, so read your shirt’s label. Cotton or cotton-blend shirts can take higher heat, but something with polyester or spandex might be a bit more delicate. If in doubt, pick a low setting and move up if you need to.

Shirts always get ironed from the collar down. Lift the collar up and iron the underside from one tip to the other. Then flip the shirt over and repeat on the outside.

Unbutton your cuffs and repeat the process above, ironing them on the inside and then the outside, pressing any wrinkles out towards the edges. Never iron over the buttons as they can leave a mark on your shirt – iron around them instead.

Unbutton your shirt and lay one side of its front flat on the ironing board, with the rest hanging off the side. Start ironing at the shoulders and work your way down, pressing creases out towards the sides. Again, avoid the buttons and iron carefully around them instead. Give the placket (that’s the strip your buttons are on) extra attention as it’ll be the most visible part of your shirt when you’ve got a jacket on. Repeat on the other side.

Flip your shirt over and lay it with the collar nearest the pointy end of the ironing board. Start with the yoke at the top (that’s the panel that covers the back of your shoulders), and work your way down to the bottom.

Lay the sleeve down the length of your ironing board, ensuring it’s nice and flat. Iron from the shoulders down to the cuff. You don’t really want a crease down the side of your arms, so make sure you concentrate on the middle of the fabric and stay away from the edges. As usual, repeat on the other side. And, you know, the other arm.

Iron slowly, but not so slowly that you burn your shirt. Burns are not a good look.

A pair of prom shoes can last you a lifetime, but not if you knock them about.

Like anything worth keeping, you’ve got to treat them right. It’s simple, really. These are the four steps you need to know.

The key to crack-free, shiny leather shoes is a good old moisturise. First things first, remove the laces (you don’t want polish on them). Next, wipe away any surface dirt with a brush. Then apply leather conditioner to an old t-shirt and rub in a circular motion to fill in any cracks.

Choose a cream or wax based polish in a shade that matches your shoes. If in doubt, go lighter, unless you want to completely change the colour. Apply the polish in a circular motion, then buff vigorously with a brush and leave your shoes to dry.

Grab that old t-shirt again and dab some polish on it, and add a few drops of water onto the leather. Next, you’ll need a bit of elbow grease. Polish the water away until you’ve got a smooth, shiny, mirror-like finish.

It’s time to admire your handy work.